Home » Desktop

DVB-T in Bern

Last week, Bantiger switched on its digital broadcast for SF1, SF2, TSR1, TSR2 and TSI1. I could not find the correct settings in any of the DVB user forums, let alone the official site, but got it to work after some experimentation. Not that I had a lot of time to watch TV, but here goes.

The magic line for Kaffeine

~/.kde/share/apps/kaffeine/dvb-t/ch-Bern
# DVB-T Bern (Bantiger)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 690000000 8MHz 5/6 NONE QAM16 8k 1/4 NONE # SF1, SF2, TSR1, TSR2, TSI1
Set ch-Bern as Source in the Device Settings and launch the scan.

Channel configuration for Klear

~/.klear/channels.conf
SF1:690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6: \
  FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:160:80:5   
SF2:690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6: \
  FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:163:92:5   
TSR1:690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6: \
  FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:161:84:5   
TSI1:690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6: \
  FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:162:88:5   
TSR2:690000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6: \
FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:164:96:5
Bookmark/Search this post with:
delicious – digg – reddit – magnoliacom – newsvine – furl – google – yahoo – technorati – icerocket – pubsub
mike – Tue, 2007 – 05 – 29 22:41
by mike – mike's blog – add new comment